Honeywell VX6, Справочное руководство, Страница: 91 / 356

E-EQ-VX6RG-F VX6 Reference Guide
Chapter 3 System Configuration
Introduction
There are several different aspects to the setup and configuration of the VX6. Many of the setup
and configuration settings are dependent upon the optional features such as hardware and software
installed on the unit. The examples found in this chapter are to be used
as examples only
, the
configuration of your specific VX6 computer may vary. The following sections provide a general
reference for the configuration of the VX6 and some of its optional features.
Your VX6 operating system may be Windows CE .NET or Windows CE 5.0. The VX6 operating
system version is displayed on the Desktop in the default Desktop Display Background.
This chapter presents information and procedures that are common to both CE versions unless
otherwise noted.
Windows CE Operating System
For general use instruction, please refer to commercially available Windows CE
user’s guides or the Windows CE on-line Help application installed with the VX6.
This chapter’s contents assume the system administrator is familiar with Microsoft Windows
options and capabilities loaded on most standard Windows computers.
Therefore, the sections that follow describe only those Windows capabilities that are unique to the
VX6 and its Windows CE environment.
2.4 GHz Radio Configuration
All 2.4GHz radio configuration is included in Chapter 5, “Wireless Network Configuration”.
Warmboot
A warmboot reboots the computer without erasing any registry data. However, any applications
installed to RAM are lost, as is all data in RAM. This happens because the operating system is
stored on the flash drive, but must be loaded into RAM to run.
All registry configurations are automatically preserved. Any applications stored as .CAB files in
the System directory and configured in the registry to persist are reinstalled on boot up by the
Launch utility.
Coldboot
A coldboot reboots the computer, erases all registry data and returns the computer to factory
default settings. In order to be preserved, applications and data must be stored in the System
folder. Registry information is not preserved. Only factory default applications and drivers stored
as .CAB files in the System directory are loaded by Launch.
A cold boot is initiated by running the Coldboot application in the \Windows directory. This
application automatically cold boots the VX6, erasing any customer applied registry changes and
returning the VX6 to its factory settings.