Honeywell VX6, Справочное руководство, Страница: 212 / 356

192 Summit Radio
VX6 Reference Guide E-EQ-VX6RG-F
Status Tab
Figure 5-6 SCU – Status Tab
This screen provides information on the radio:
•
The profile being used
•
The status of the radio card (down, associated, authenticated, etc.)
•
Client information including device name, IP address and MAC address.
•
Information about the Access Point (AP) maintaining the connection to the network
including AP name, IP address and MAC address.
•
Channel currently being used for wireless traffic
•
Bit rate in Mbit.
•
Current transmit power in mW
•
Beacon period – the time between AP beacons in kilomircoseconds. (one
kilomicrosecond = 1,024 microseconds)
•
DTIM interval – A multiple of the beacon period that specifies how often the beacon
contains a delivery traffic indication message (DTIM). The DTIM tells power
saving devices a packet is waiting for them. For example, if DTIM = 3, then every
third beacon contains a DTIM.
•
Signal strength (RSSI) displayed in dBm and graphically
•
Signal quality, a measure of the clarity of the signal displayed in percentage and
graphically.
There are no user entries on this screen.
Note: After completing radio configuration, it is a good idea to review this screen to verify the
radio has associated (no encryption, WEP) or authenticated (LEAP, any WPA), as
indicated above.