Honeywell VX6 Скачать руководство пользователя страница 207

Страница: 207 / 356

Summit Radio

187

E-EQ-VX6RG-F

VX6 Reference Guide

Profile Tab

Notes: If the Admin password is not entered, the user can view the Profile parameter settings

but cannot make any changes. The buttons on this tab are grayed out if the user is not
logged in.

The Profile tab was previously labeled Config.

Figure 5-4 SCU – Profile Tab

When logged in as an Admin (see the Main tab), use the Profile tab to manage profiles:

•

Rename

– Gives the profile a new, unique name. If the new name is not unique, an

error message is displayed and the profile is not renamed.

•

Delete

– Deletes the profile. The current active profile cannot be deleted. In that

case, an error message is displayed and the profile is not deleted.

•

New

– Creates a new profile with the default settings (see the list below) and

prompts for a name. The name must be unique. If not, an error message is displayed
and the profile is not created.

•

Scan

– Scans for and displays a list of available APs. Can be used to create a profile

from the APs listed.

•

Commit

– Ensures that the profile settings made on this screen are saved in the

profile.

When not logged in, the parameters can be viewed, but cannot be changed.

Содержание VX6




































































































































































































































































































































































Результаты поиска

Содержание VX6

Отзывы:

Honeywell VX6, Справочное руководство, Страница: 207 / 356

Результаты поиска

Содержание VX6

Отзывы: