Honeywell VX6, Справочное руководство, Страница: 186 / 356

166 Barcode
VX6 Reference Guide E-EQ-VX6RG-F
Step 6: Strip Barcode Data Strings
Access: Start | Settings | Control Panel | Scanner | Barcode | Symbology
Settings
Use this option to strip specific data strings from the barcode data.
Figure 4-14 Strip Barcode Data Strings
To specify the barcode strings to search for, click the Barcode Data button.
Figure 4-15 Define Barcode Data Strings
The specified string is stripped from the barcode for the Symbology selected from the pulldown
list. If ‘All’ is selected, the data stripping is applied to all symbologies that have not been
previously customized.
Use the text box to enter the desired search string. The rules are listed below:
•
Strings are searched in the order they are listed. If the list contains ABC and AB in
that order, incoming data is searched for ABC first, and then searched for AB.
•
When a match between the first characters of the barcode and a string from the list is
found, that string is stripped from the barcode data.
•
Processing terminates when a match from the list is found. If no match is found,
processing terminates when the end of the strip list is reached.
•
If the wildcard * is not specified, the string is assumed to begin strip from the
beginning of the data. The string ABC* strips off the prefix ABC. The string *XYZ
strips off the suffix XYZ. The string ABC*XYZ strips both the ABC prefix and the
XYZ suffix from the barcode data. Only one wildcard * is allowed per string. (The