manualshive.com logo in svg

Honeywell VX6, Справочное руководство, Страница: 174 / 356

Поделиться
Скачать
Honeywell VX6 Скачать руководство пользователя страница 174

154 

COM Ports 

VX6 Reference Guide 

E-EQ-VX6RG-F 

COM Ports 

 

Figure 4-2  Scanner Properties / COM Port Settings 

Adjust the settings and click the OK box to save the changes. The changes take effect 
immediately. 

The COM1 display contains the same parameters as the COM3 Tab. Adjust the settings and click 
the OK box to save the changes. The changes take effect immediately. 

Note: 

This panel configures the VX6 for an external scanner.  It DOES NOT configure the 
tethered scanner.  Please refer to the documentation for the tethered scanner for 
information on configuring the tethered scanner. 

Serial Port Pin 9 

To configure either COM port to have power (+5V) on Pin 9, check the “Power on pin 9 (+5V)” 
checkbox on the appropriate tab.  This is required to supply power to an external scanner, 

To configure either Com port to have RI on Pin 9, uncheck the “Power on pin 9 (+5V)” checkbox 
on the appropriate tab. 

 

Содержание VX6





































































































































































































































































































































































Отзывы:

Нет отзывов