manualshive.com logo in svg

Honeywell VX6, Справочное руководство, Страница: 173 / 356

Поделиться
Скачать
Honeywell VX6 Скачать руководство пользователя страница 173

Main 

153 

E-EQ-VX6RG-F 

VX6 Reference Guide 

Main 

 

Figure 4-1  Scanner Properties / Main Tab 

Adjust the settings and click the OK box to save the changes. The changes take effect 
immediately. 

Two modes are determined by the configuration of “Send Key Messages (WEDGE)” setting.  

•

 

If “Send Key Messages (WEDGE)” is checked, the Scanner Driver is in “Key 
Message” (also known as “character”) mode which sends the barcodes to the 
application with the focus as keystrokes.  All data scanned is converted to keystrokes 
and sent to the active window. 

•

 

If “Send Key Messages (WEDGE)” is not checked, the Scanner Driver is in “Block” 
mode which buffers the data that can be read by an application from the WDG: 
device through the OS or LXE APIs.  Note that this latter method is significantly 
faster than using “Wedge”.   

•

 

Even if Send Key Messages is enabled (“key mode”), the data is still available using 
the scanner APIs (“block mode”).  If two or more applications are reading the data in 
Block mode, ClearBuf must be set to Off so data is not erased when read.  Please 
refer to the “CE API Programming Guide” for details on scanner APIs.  

Содержание VX6





































































































































































































































































































































































Отзывы:

Нет отзывов