Honeywell VX3Plus Скачать руководство пользователя страница 74 | Manualshive

Страница: 74 / 282

Honeywell VX3Plus Скачать руководство пользователя страница 74

Accessibility

Start > Settings > Control Panel > Accessibility

Customize the way the VX3Plus keyboard, sound, display, mouse, automatic reset and notification sounds function. There are
a few changes from general Windows desktop Accessibility options.

Note:

StickyKeys and StickyKeys Settings on the Keyboard panel are disabled as this setting, when

enabled, interferes with the VX3Plus's assigned sticky key implementation.

Tab

Contents

Keyboard

Sticky Keys - Disabled.

ToggleKeys - Disabled by default. Tap the

Use ToggleKeys

checkbox to enable this option. Tap the Settings button to view or
change parameters.

Sound

SoundSentry is disabled by default. Tap the

Use SoundSentry

checkbox to enable this option. Tap the Settings button to view or
change parameters.

Display

High Contrast is disabled by default. Tap the

Use High Contrast

checkbox to enable this option. Tap the Settings button to view or
change parameters.

Mouse

MouseKeys is disabled by default. Tap the

Use MouseKeys

checkbox to enable this option. Tap the Settings button to view or
change parameters.

General

Automatic reset is disabled by default. Tap the

Turn off accessibility

features

checkbox to enable this option and use the dropdown option

to assign a timer.

Notification is enabled by default. Sounds are emitted when turning a
feature on or off.

The following exceptions are due to a limitation in the Microsoft Windows CE operating system:

l

If the ToggleKeys option is selected, please note that the ScrollLock key does not produce a sound as the CapsLock
and NumLock keys do.

3-34

«
...
72
73
74
75
76
...
»

Содержание VX3Plus



























































































































































































































































































Отзывы:

Нет отзывов