Honeywell VX3Plus Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 282

Honeywell VX3Plus Скачать руководство пользователя страница 37

LED Functions

Across the top of the keypad are LEDs that provide visual cues to current VX3Plus operation. When the LED is not illuminated,
the function is inactive.

Note:

The VX3Plus does not have a Bluetooth managed LED.

2nd

LED. The next keypress is a 2nd keypress. Amber when on. Blinks amber during configuration key sequence.

ALT

The next keypress is an

keypress. Amber when on and unlit when off.

CTRL

The next keypress is a

keypress. Amber when on and unlit when off.

SHFT

The next letter is the

letter on alpha keys and the shifted character on the numeric keypad keys. Amber when on and

unlit when off.

CAPS

letters are active until the CAPS key sequence is pressed again. Amber when on and unlit when off.

STAT

Status Indicator. Amber – device is booting up.

Speaker

The speaker is located on the front of the VX3Plus above the Power button. The Speaker has a loudness of at least 90 dB
(2700 Hz) at 10 cm measured from the front of the unit. The Speaker volume is adjustable via the keypad or the Control Panel
or by an application through the use of an API call.

There are 16 distinct volume levels. The minimum volume level is 0 (no sound) with a default setting of maximum non-distorted
volume. The volume sticks at maximum and minimum levels.

The speaker is disabled when a headset is plugged into the Audio Jack on the endcap. Speaker volume is enabled and
adjusted using the Control Panel Volume & Sounds control panel.

2-17

«
...
35
36
37
38
39
...
»

Содержание VX3Plus



























































































































































































































































































Отзывы:

Нет отзывов