Honeywell VX3Plus, Справочное руководство, Страница: 174 / 282

l
Min / Max
l
Code ID
l
Leading / Trailing
l
Barcode Data
l
Prefix / Suffix
Note: When Enable Code ID is set to None on the Barcode tab and when All is selected in the
Symbology field , Enable and Strip Code ID on the Symbology panel are grayed and the user is not
allowed to change them, to prevent deactivating the scanner completely.
When All is selected in the Symbology field and the settings are changed, the settings in this dialog become the defaults, used
unless overwritten by the settings for individual symbologies. This is also true for Custom IDs, where the code IDs to be
stripped are specified by the user.
Note: In Custom mode on the Barcode tab, any Code IDs not specified by the user will not be stripped,
because they will not be recognized as Code IDs.
If a specific symbology's settings have been configured, a star (*) will appear next to it in the Symbology drop-down box, so the
user can tell which symbologies have been modified from their defaults.
If a particular symbology has been configured, the entire set of parameters from that symbologies screen are in effect for that
symbology. In other words, either the settings for the configured symbology will be used, or the default settings are used, not a
combination of the two.
If a symbology has not been configured (does not have an * next to it) the settings for All are used which is not necessarily the
default.
Parameters
Enable
This checkbox enables (checked) or disables (unchecked) the symbology field.
The scanner driver searches the beginning of the barcode data for the type of ID specified in the Barcode tab -- Enable Code ID
field plus any custom identifiers.
When a code ID match is found as the scanner driver processes incoming barcode data, if the symbology is disabled, the
barcode is rejected. Otherwise, the other settings in the dialog are applied and the barcode is processed. If the symbology is
disabled, all other fields on this dialog are grayed.
When there are no customized symbology settings , and the Enable checkbox is unchecked, while All is selected, a warning
message is displayed.
Click the Yes button or the No button. Click the X button to close the dialog without making a decision.
If there are customized settings , uncheck the Enable checkbox for the All symbology. This results in disabling all symbologies
except the customized ones.
Min
This field specifies the minimum length that the barcode data (not including Code ID) must meet to be processed.
3-134