Honeywell VX3Plus Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 282

Honeywell VX3Plus Скачать руководство пользователя страница 15

Chapter 1: Introduction

The VX3Plus Vehicle Mount Computer (VMC) is a rugged, vehicle mounted, PC (Personal Computer) running a Microsoft®
Windows® CE operating system and capable of wireless data communications from a fork-lift truck or any properly configured
vehicle.

The optional Bluetooth® module supports Bluetooth printers and scanners. The VX3Plus provides the power and functionality
of a desktop computer in a vehicle mounted unit, with a wide range of options.

Contact your

for information on the latest upgrades for your VX3Plus.

End User License Agreement (EULA)

When a new VX3Plus starts up a EULA is displayed on the touchscreen. It remains on the screen until the Accept or Decline
button is tapped with a stylus.

Tap the Accept button to accept the EULA terms and the VX3Plus continues the startup process. The EULA is not presented
to the user again.

Tap the Decline button to decline the EULA and the VX3Plus will reboot. It will continue to reboot until the Accept button is
tapped with the stylus.

Note:

The EULA will be presented after any operating system upgrade or re-installation, including language-

specific operating systems.

1-1

«
...
13
14
15
16
17
...
»

Содержание VX3Plus



























































































































































































































































































Отзывы:

Нет отзывов