Honeywell VX3Plus Скачать руководство пользователя страница 137

Страница: 137 / 282

Mixer

Start > Settings > Control Panel > Mixer

The VX3Plus has a speaker. It is active when a headset is not connected to the device.

Use the settings on these panels to adjust the volume, record gain and sidetone for microphone input, speaker and speaker
output.

Headsets can be enabled, disabled and selected using these panels.

Factory Default Settings

Master Volume

-10.5 dB

Record Gain

22.5 dB

Sidetone

12.0 dB

Input

None

Input Boost

Dimmed

+6db Output Boost

Disabled

Select the input for the mixer. Move the sliders up and down, or tap the up and down arrows, to adjust the decibel level.

Note:

Set Input to

None

when using stereo headphones. Set Input to

Mic1

when using a mono headset

with microphone.

3-97

Содержание VX3Plus



























































































































































































































































































Результаты поиска

Содержание VX3Plus

Отзывы:

Honeywell VX3Plus, Справочное руководство, Страница: 137 / 282

Результаты поиска

Содержание VX3Plus

Отзывы: