Honeywell VX3Plus Скачать руководство пользователя страница 107

Страница: 107 / 282

OPP Setup

Use this screen to setup the VX3Plus for Object Push Protocol (OPP).

Option

Information

Inbox

This is an alphanumeric field displaying the currently selected Inbox.

The Inbox is the location where files pushed to the VX3Plus from a remote client are
stored. Use the browse button

...

to browse to and select the Inbox folder.

Use Windows Explorer to create a custom directory, if desired, before selecting the
Inbox folder.

The default Inbox is \My Device\My Documents\DefaultInbox.

Outbox

This is an alphanumeric field displaying the currently selected Outbox.

The Outbox is the location where files are stored to be pushed from the VX3Plus to a
remote server. Use the browse button

...

to browse to and select the Outbox folder.

Use Windows Explorer to create a custom directory, if desired, before selecting the
Outbox folder.

The default Inbox is \My Device\My Documents\DefaultOutbox.

Write Capable

When checked, files may be written to the VX3Plus. When unchecked, inbound files are
rejected.

This option is enabled (checked) by default.

Enable Notifications

When checked, the user is notified and may be prompted for a response when files are received
by the VX3Plus. When unchecked, inbound files are received with no notification to and no
required action from the user.

This option is enabled (checked) by default.

3-67

Содержание VX3Plus



























































































































































































































































































Результаты поиска

Содержание VX3Plus

Отзывы:

Honeywell VX3Plus, Справочное руководство, Страница: 107 / 282

Результаты поиска

Содержание VX3Plus

Отзывы: