Honeywell Voyager 1400g Series, Руководство пользователя, Страница: 57 / 216

3 - 7
Presentation Mode
Presentation Mode uses ambient light to detect bar codes. The LED dims until
a bar code is presented to the scanner, then the LED brightens to read the
code. If the light level in the room is not high enough, Presentation Mode may
not work properly.
Idle Illumination - Presentation Mode
Scan one of the bar codes below to set the LED illumination for the scanner
when it is in an idle state in Presentation Mode.
Default = High.
Note: If you use one of the lower Idle Illumination settings, and there is not
enough ambient light, the scanner may have difficulty detecting when
a bar code is presented to it. If the scanner has difficulty “waking up”
to read bar codes, you may need to set the Idle Illumination to a
brighter setting.
Presentation Sensitivity
Presentation Sensitivity is a numeric range that increases or decreases the
scanner's reaction time to bar code presentation. To set the sensitivity,
scan the
Sensitivity bar code, then scan the degree of sensitivity (from 0-
20) from the inside back cover, and Save . 0 is the most sensitive setting,
and 20 is the least sensitive. Default = 1.
Presentation Mode
Low
Medium
* High
Sensitivity