Honeywell Vocollect, Справочник по аппаратуре

Страница: 301 / 316

| Honeywell ™ Regulatory Compliance | 301
Regulatory Approvals for Bluetooth
®
Radio Devices
Honeywell devices that contain an integrated Bluetooth ™ module are designed to comply with the most current
applicable standards on safe levels of RF energy, developed by the Institute of Electrical and Electronics Engineers
(IEEE) and the American National Standards Institute Communications Commission (FCC).
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Honeywell is
under license. Other trademarks and trade names are those of their respective owners.
Honeywell
For Users in the U.S.A. and Canada: Laser Compliance and Precaution
The A730 is registered with the CDRH as a Class 2 Laser Product (21 CFR Subchapter J, Part 1040). This product
has a maximum output of 1 mW at 630-680 nm.
CAUTION: There are no user serviceable parts inside the A700. Use of controls or adjustments, or
performance of procedures other than those specified herein, may result in hazardous laser light exposure of
up to 1 mW at 630-680 nm.
Note: There are no controls or adjustments provided for routine operation or maintenance of the A730.
For Users in the U.S.A and Canada: Imager Compliance and Precaution
LED Safety - The scan engine in the A730 complies with IEC 62471:2006-07.
The scan engine in A730 is classified as Risk Group 1.
• Exempt (No photobiological hazards based on the limits defined in the standard)
• Risk Group 1 (Low-Risk – does not pose a hazard based on normal behavioral limitations on exposure)
• Risk Group 2 (Moderate-Risk – does not pose a serious risk due to the aversion response to very bright light
sources or due to thermal discomfort)