Honeywell Vocollect, Справочник по аппаратуре

Страница: 281 / 316

| Template Training Options | 281
1. If a current operator has previously performed the task the new operator is going to use, go to VoiceConsole and
perform the steps for viewing an operator’s voice templates using the current operator. See Managing Operator
Numbers in the VoiceConsole online help for more information.
2.
On the Manage Operator Templates:<operator name> page in VoiceConsole, print the list of trained words. See
Viewing Printable Versions of List Data in the VoiceConsole online help.
3. If necessary, on the printed list, circle commonly misheard or confusing words.
Figure 189: Printed List with Commonly Misheard or Confusing Words Circled
4.
Honeywell recommends the new operator review the list prior to training so he or she is familiar with the words
that will be used
If templates have not been trained for the task the new operator is going to use, have the supervisor or current operator
train templates for that task and perform the steps above. To proceed with the actual training, follow the detailed list
of instructions in the “Training with the Talkman Only” section above.
Training Using the Device Screen
Note: This is not supported on Talkman devices.
1. On the device screen, tap Start.
2.
Tap the Vocollect Voice symbol.
The Vocollect Voice screen displays. The status indicator turns red for a few moments then turns green. The device
says, "Current operator is <name>. <Number> words not trained. Good night." Make sure the device says your
name. If it does not, check with your supervisor or trainer.
3.
Tap the play/pause button on the device screen. The device says, "Please keep quiet for a few seconds."
If the device does not say this, tap the operator button to manually perform a background noise sample.
The device says, "Please say zero."
4. Say "Zero."
The device says, "One."
5. Say "One."
The device says, "Two."
6. Say "Two."
The device says, "Please say the following words as they appear on the screen."
The Voice Training text box displays.