Honeywell Vocollect, Справочник по аппаратуре

Страница: 25 / 316

| Talkman Devices and Headsets | 25
The actual voice that speaks to the operator can be adjusted in several ways so that the operator can hear and
understand the information clearly.
• Adjust the pitch of the voice lower or higher
• Adjust the volume of the voice louder or softer
• Adjust the speed of the voice slower or faster
• Change the gender of the voice to male or female
Before making any changes to the voice:
Make sure the device is on or sleeping. The LED indicator should be either solid green or blinking green (A500, T5-
series and T2-series), solid green (T1), or have a solid green ring segment or a rotating green ring (A700).
Adjusting the Pitch
Make sure the device is on or sleeping. The LED indicator should be either solid green or blinking green (A500, T5-
series and T2-series), solid green (T1), or have a solid green ring segment or a rotating green ring (A700).
Note: You can only adjust the pitch for certain languages and certain Voices.
1. Press the Operator button.
The device says "Current operator is operator name . Select menu item."
2.
Press the + or — button until the device says "Change pitch."
3. Press the Operator button.
If you use the + button to scroll through the options, Change Pitch is the fifth menu item in the list.
4. Press the + button to make the voice higher or the — button to make the voice lower.
The device says "higher" each time you press the + button and "lower" each time you press the — button. If the
pitch of the voice is at the highest possible setting, it says "This is highest." If the pitch of the voice is at the lowest
possible setting, it says "This is lowest."
Note: You can exit this menu without changing the settings by pressing the Play/Pause button before you
press the Operator button.
5.
When the pitch reaches the level you want, press the Operator button to save the new pitch setting.
Adjusting the Volume Using Voice
Make sure the device is on or sleeping. The LED indicator should be either solid green or blinking green (A500, T5-
series and T2-series), solid green (T1), or have a solid green ring segment or a rotating green ring (A700).
1. Say "Talkman, louder" to increase the volume or "Talkman, softer" to decrease the volume.
If the device says "This is softest" or "This is loudest", you cannot make the volume any louder or softer.
2.
When the voice is as loud or as soft as you want it, say "Talkman continue" to return to work.
Adjusting the Volume Using Device Buttons
Make sure the device is on or sleeping. The LED indicator should be either solid green or blinking green (A500, T5-
series and T2-series), solid green (T1), or have a solid green ring segment or a rotating green ring (A700).
Press the + button to make the voice louder or the — button to make the voice softer.
The device says "louder" when the + button is pressed and "softer" when the — button is pressed. If the volume
of the voice is at the loudest possible setting, it says, "This is loudest." If the volume of the voice is at the softest
possible setting, it says, "This is softest."
Adjusting the Speed
Make sure the device is on or sleeping. The LED indicator should be either solid green or blinking green (A500, T5-
series and T2-series), solid green (T1), or have a solid green ring segment or a rotating green ring (A700).
1. Press the Operator button.