Honeywell Tuxedo Touch страница 48 Скачать руководство пользователя

Страница: 48 / 64

Setup Menus

Your installer has already set up your system, however, if changes are needed, you can change the settings as described
below.

Brightness and Volume Control

From the "Home" screen, press

Setup

. Move the

Brightness/Volume

slide bar up or down to increase or decrease

settings. Press

Save

when complete. If changes are made and you press

Save

, a pop-up window displays:

“Information Settings Saved”

and

exits to the home page.

Note

: Pressing

Back

without saving will display

“Aui Setup Changed. Do you want to save it?

Yes or No. Yes

saves

the changes.

discards the change.

Display & Audio Setup

Display and Audio Setup

menus let you access Operating Modes.

Operating Modes

provides access to:

Chime Mode, Voice Mode,

and

Voice Chime.

•

When in Chime Mode the Keypad chimes whenever a door or window is open.

•

When in Voice Mode the Keypad voice annunciates whenever a change in system status occurs such as Armed,

Disarmed, or Alarms.

•

When in Voice Chime mode the chime mode and voice mode are in effect. The chime beeps followed by voice

annunciation.

To change these settings, do the following:

From the "Home" screen, press

Setup

. Press

Disp & Audio Setup

and enter your Authorized Code, if

required. Select

Chime Mode

Voice Mode

to turn the mode on or off.

Press

HOME

BACK

after making your selection.

The Chime feature is intended for convenience and is not intended for life safety purposes or pool alarm and
does not meet the requirements of UL 2017.

Notes:

•

If the Chime Mode and Voice Mode are both selected, the Voice Chime is automatically selected.

•

When the keypad exits the “Operating Modes” screen, your selection is saved.

•

It may take a few seconds for the Chime Mode to take effect.

Содержание Tuxedo Touch
































































Результаты поиска

Содержание Tuxedo Touch

Отзывы:

Похожие инструкции для Tuxedo Touch

Бренды по названию

Популярные бренды

Honeywell Tuxedo Touch, Руководство пользователя

Результаты поиска

Содержание Tuxedo Touch

Отзывы:

Похожие инструкции для Tuxedo Touch

Бренды по названию

Популярные бренды