HE360 HUMIDIFIER AND INSTALLATION KIT
69-2629EF—01
6
Fig. 3. Disassembling humidifier.
7.
Position the securing clips as shown in Fig. 4.
Fig. 4. Position securing clips.
8.
Make sure the humidifier housing is level, then position it in the opening so the
plastic tabs are in place on the
lower sheet metal edge
of the opening. Use pli-
ers, as necessary, to flatten cut edges. See Fig. 5.
9.
Push in securing clips until completely seated.
10.
Drill holes and install the three sheet metal screws on the top of the humidifier
housing. Secure the housing with the three remaining screws.
M12809
COVER
ASSEMBLY
HUMIDIFIER
PAD ASSEMBLY
FEED TUBE NOZZLE
WATER
DISTRIBUTION TRAY
HUMIDIFIER
HOUSING
THUMB
SCREW
M12813
CLIP
CLIP
