manualshive.com logo in svg

Honeywell Thor VM3, Руководство пользователя, Страница: 49 / 378

Поделиться
Скачать
Honeywell Thor VM3 Скачать руководство пользователя страница 49

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

37

Antenna Connections

External Antenna Connector

Internal 802.11 Antenna

If the internal 802.11 antenna option is ordered, antennas are mounted inside the Thor 
VM3. The internal antennas are not user accessible.

Vehicle Remote Antenna

The external antennas can be remotely mounted on the vehicle. See 

Install Remote 

Antenna

 for instructions. External antenna kits are available for the 802.11 Wi-Fi radio, 

GPS and WWAN.

The Thor VM3 is equipped with an 802.11 radio and can be 
ordered with internal antennas, external antennas or exter-
nal remote mount antennas. When the Thor VM3 is ordered 
with internal antennas, the external antenna connectors are 
not used. GPS and WWAN are optional on the Thor VM3 and 
require external remote mount antennas.

1. WI-FI (MAIN) 

802.11 Main Exter-
nal Antenna Con-
nector

2. WAN (MAIN) (Blue 

label) Main WWAN 
Antenna Connector

3. GPS (Green label) 

GPS Antenna 
Connector

4. WAN (AUX) (Blue 

label) Auxiliary 
WWAN Antenna 
Connector

5. WI-FI (AUX) 802.11 

Auxiliary External 
Antenna Connector

When the Thor VM3 is ordered with the internal antenna option, the 
802.11 antenna connectors on the back are not connected to the 
802.11 radio. Instead the internal antenna connector is connected to 
the 802.11 radio.

Remove the rubber cap, if present, from the antenna connector before 
connecting an external antenna.

1

2

3

4

5

Содержание Thor VM3



























































































































































































































































































































































































Отзывы:

Нет отзывов