manualshive.com logo in svg

Honeywell Thor VM3, Руководство пользователя, Страница: 203 / 378

Поделиться
Скачать
Honeywell Thor VM3 Скачать руководство пользователя страница 203

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

191

Password

Start > Settings > Control Panel > Password

Important: This password must be entered before performing a Load Factory Defaults. 

If entering a power-on or screen saver password does not allow you to disable this pass-
word protection or perform a Load Factory Defaults, contact 

Technical Assistance

.

Factory Default Settings

Password

•

The password and password settings are saved during a restart.

•

After a password is assigned and saved, each time a Settings > Control Panel option 
is selected, the user will be required to enter the password before the Control Panel 
will open.

Check the box to enable the password, enter a timeout and select a password type.

Enter the password in the Password text box, then press Tab and type the password 
again to confirm it. 

A changed/saved password is in effect immediately. 

Prompt if device unused for 

Disabled

Timeout

0 minutes

Password

Blank

Содержание Thor VM3



























































































































































































































































































































































































Отзывы:

Нет отзывов