Honeywell Thor VM2 Скачать руководство пользователя страница 75

Страница: 75 / 398

Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide

Step 1c – Attach RAM Plate to Vehicle and Attach RAM Ball

Note:

If you are using the RAM ball mount, please go to

Step 1a – Attach RAM Ball to Vehicle

you are using the RAM clamp mount, please go to

Step 1b – Mount RAM Clamp to Vehicle

1. Determine the position for mounting the RAM ball plate. Be sure to position the

RAM plate to allow access to the switches and ports on the bottom of the Thor VM2.

2. Attach the RAM ball plate to the vehicle mounting surface using four 1/4 bolts (not

included) or equivalent fasteners.

3. If not already attached, attach the RAM ball to the RAM ball plate using three M6

nuts and washers.

IMPORTANT

: Mount to the most rigid surface available.

Mounting Dimensions

There are 4 mounting holes in the plate. Use four 1/4 bolts to secure the plate to the
vehicle.

Note:

Drawing not to scale.

176 mm

6.99”

200 mm

7.87”

76mm 2.99”

100mm 3.94”

Содержание Thor VM2















































































































































































































































































































































































































Результаты поиска

Содержание Thor VM2

Отзывы:

Honeywell Thor VM2, Руководство пользователя, Страница: 75 / 398

Результаты поиска

Содержание Thor VM2

Отзывы: