Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
23
Setup Terminal Emulation Parameters
Note:
The instructions below are for Honeywell RFTerm. If a different terminal emulation
software is installed on your Thor VM2 refer to the documentation for that software.
Before you make a host connection, you will, at a minimum, need to know:
•
the alias name or IP address (Host Address) and
•
the port number (Telnet Port) of the host system to properly set up your host session.
1. Make sure the mobile client network settings are configured and functional. If you
are connecting over wireless LAN (802.11
x
), make sure your mobile client is com-
municating with the Access Point.
2. From
Start > Programs,
run RFTerm or tap the RFTerm icon on the desktop.
3. Select
Session > Configure
from the application menu and select the “host type”
that you require. This will depend on the type of host system that you are going to
connect to; i.e., 3270 mainframe, AS/400 5250 server or VT host.
4. Enter the “Host Address” of the host system that you wish to connect to. This may
either be a DNS name or an IP address of the host system.
5. Update the telnet port number, if your host application is configured to listen on a
specific port. If not, just use the default telnet port.
6. Select
OK
.
7. Select
Session > Connect
from the application menu or tap the “Connect” button on
the Tool Bar. Upon a successful connection, you should see the host application
screen displayed.
To change options such as Display, Colors, Cursor, Bar Code, etc., refer to these sections
in the
RFTerm Reference Guide
for complete descriptions of these and other features.
Cleaning
Cleaning the Thor VM2 and the Dock
Dampen a cloth with the cleaner and then wipe the surface. Do not spray the cleaner
directly onto the Thor VM2 or the dock. Avoid harsh chemicals. The following cleaners
are recommended:
•
Windex® Glass Cleaner
•
Formula 409® All-Purpose Cleaner or Glass and Surface Cleaner
•
Fantastik® All Purpose Cleaner
•
Liquid hand soap
Содержание Thor VM2
