manualshive.com logo in svg

Honeywell Thor VM2, Руководство пользователя, Страница: 31 / 398

Поделиться
Скачать
Honeywell Thor VM2 Скачать руководство пользователя страница 31

Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide

19

Top View - Enhanced Dock

Only the Enhanced Dock has these connectors on the top. The connectors are located 
behind water tight plugs.

Note:

A BIOS and operating system upgrade is necessary to support the Ethernet port. See 

Thor 

VM2 and Enhanced Dock Support

 for information.

Backlights and Indicators

Display Backlight

There are several configuration options for the Thor VM2 display backlight:

Power Management

The display backlight is controlled by power management. When the user activity timer 
expires, the display backlight is turned off. Timeouts can be set for the available power 
management schemes.

See 

Power

 for configuration options.

Backlight Brightness

The intensity of the display backlight can be manually configured:

1. Press the 

Blue

 key to enter Blue mode

2. Press the 

P3

 key to increase backlight brightness or the 

P4

 key to decrease 

backlight brightness.

3. Press the 

Blue

 key to exit Blue mode.

Refer to the 

Screen Control

 panel for the current display brightness level.

Screen Blanking

The Thor VM2 can be configured to blank (blackout) the display while the vehicle is in 
motion.

Refer to the 

Screen Control

 panel for information.

USB Host               Ethernet

Содержание Thor VM2















































































































































































































































































































































































































Отзывы:

Нет отзывов