manualshive.com logo in svg

Honeywell Thor VM2, Руководство пользователя, Страница: 269 / 398

Поделиться
Скачать
Honeywell Thor VM2 Скачать руководство пользователя страница 269

Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide

257

Move the slider to allocate more memory for programs or storage. If there isn’t enough 
space for a file, increase the amount of storage memory. If the mobile device is running 
slowly, try increasing the amount of program memory.

Device Name

The device name and description can be changed by the user. Enter the name and 
description using either the keypad or the Input Panel and tap OK to save the changes. 
This information is used to identify the Thor VM2 to other computers and devices.

Copyrights

This screen is presented for information only. The Copyrights information cannot be 
changed by the user.

Содержание Thor VM2















































































































































































































































































































































































































Отзывы:

Нет отзывов