manualshive.com logo in svg

Honeywell Thor VM2, Руководство пользователя, Страница: 230 / 398

Поделиться
Скачать
Honeywell Thor VM2 Скачать руководство пользователя страница 230

218

Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide

Keyboard

Start > Settings > Control Panel > Keyboard

Set keypad key map, keypad key repeat delay, and key repeat rate. 

Factory Default Settings

1. If a USB keyboard has already been attached, remove the USB keyboard to program 

the integrated keys.

2. Start the remapping utility.

3. Program the integrated programmable keys (i.e.: P1 - P7) on the Thor VM2.

4. Exit the remapping utility.

5. Attach the USB keyboard.

6. Restart the remapping utility.

7. Remap any keys desired on the USB keyboard.

If any modifications need to be made to the P1 - P7 keys at a later time, it is necessary to 
remove any USB keyboard to edit these keys in the remapping utility.

8. :

Repeat character

Enable

Repeat Delay

Short

Repeat Rate

Slow

Содержание Thor VM2















































































































































































































































































































































































































Отзывы:

Нет отзывов