manualshive.com logo in svg

Honeywell Thor VM2, Руководство пользователя, Страница: 226 / 398

Поделиться
Скачать
Honeywell Thor VM2 Скачать руководство пользователя страница 226

214

Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide

PIN (Personal Identification Number)

The PIN is a unique sequence of numbers stored on the SIM card. 

If the radio is enabled and the SIM card requires a PIN, a connection will not occur until 
the PIN is entered successfully. After entering the PIN code, tap the Submit button. A 
message is displayed with either Success or the number of retries allowed before the 
SIM card PIN number entry is locked from further use.

PUK (Personal Unblocking Key)

The PUK is a unique sequence of alpha characters displayed on the SIM card. A default 
PUK code is not available. After entering the PUK code, tap the Submit button. A mes-
sage is displayed with either Success or the number of retries allowed before the SIM 
card PUK entry is locked from further use.

About

This tab displays information on the Gobi 3000 radio installed in the Thor VM2.

Содержание Thor VM2















































































































































































































































































































































































































Отзывы:

Нет отзывов