Honeywell Thor VM2, Руководство пользователя

Страница: 183 / 398

Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide 171
Bluetooth
Start > Settings > Control Panel > Bluetooth
Discover and manage pairing with nearby Bluetooth devices.
Factory Default Settings
Bluetooth taskbar Icon state and Bluetooth device Icon states change as Bluetooth
devices are discovered, paired, connected and disconnected. There may be audible or
visual signals as paired devices re-connect with the Thor VM2.
• The default Bluetooth setting is On.
• The Thor VM2 cannot be discovered by other Bluetooth devices when the Computer
is discoverable option is disabled (unchecked) on the Settings panel.
To use the Honeywell/Intermec SR61 Bluetooth scanner with the Thor VM2:
• The EZPair software must be version 2ab or greater. See the Bluetooth
About control panel for the version installed. Contact Technical
Assistance for software upgrade information.
• The EZPair bar code on the Thor VM2 cannot be used to connect the
SR61 scanner. Follow this procedure:
1. Make sure the scanner is on and within range of the Thor VM2.
2. Tap the Discover button on the Bluetooth Devices tab.
3. From the list of discovered devices, tap the SR61 scanner and select Pair
as a Scanner.
Settings
Turn Off Bluetooth Enabled
Computer is connectable Enabled
Computer is discoverable Disabled
Prompt if devices request to pair Enabled
Continuous search Disabled
Filtered Mode Enabled
Printer Port on COM 7: Disabled (unchecked) by default in both Filtered and Non Filtered
Modes. The option is dimmed in Non Filtered Mode.
Logging Disabled
Computer Friendly Name System Device Name
Reconnect
Report lost connection Enabled
Report when reconnected Disabled
Report failure to reconnect Enabled
Clear Pairing Table on boot Disabled
Auto Reconnect on Boot Enabled
Auto Reconnect Enabled