Honeywell THOR VM1, Справочное руководство, Страница: 233 / 324

Preparing a Device for Remote Management
Two additional utilities are necessary for remote management.
l
The Remote Management Utility (RMU) must be installed on all mobile devices first – then you can control mobile
device reboot, storage RAM adjustment, real-time updates and Avalanche Enabler properties. If the RMU is not already
installed on the Thor VM1, see
Using Wavelink Avalanche to Upgrade System Baseline .
If in doubt, verify RMU.CE.CAB exists in the \System folder. If the RMU.CE.CAB file is present when the Enabler is
installed, the RMU is also installed.
Important : If the OS package includes double-byte Asian fonts, the storage RAM property of the RMU must be higher
than the default value (40MB).
If the amount of storage RAM is too low, the Enabler returns a “Mobile unit out of resources” error.
l
Use the Wireless Configuration Application (WCA) when you want to remotely manage the Summit client device.
This utility is downloaded and installed in addition to the Remote Management Utility. The WCA is included when the
Summit radio driver software is updated. The WCA is automatically installed when the radio driver is updated.
If the Remote Management Utility (RMU) is not present on the Thor VM1, see Using Wavelink Avalanche to Upgrade System
Baseline .
5-5