Honeywell THOR VM1, Справочное руководство, Страница: 227 / 324

Using LXEConnect
1. Power up the Thor VM1.
2. Connect the Thor VM1 to the host PC using the USB connection cable. Once connected, the ActiveSync dialog box
appears and the ActiveSync connection is automatically established.
3. Select “No” for partnership when prompted. Dismiss any ActiveSync dialog boxes warning a partnership is not set up. It
is not necessary to establish a partnership to use LXEConnect. However, if a partnership is desired for other reasons,
one may be established now.
4. Double-click the LXEConnect icon that was created on the PC desktop.
5. LXEConnect launches.
6. Click the OK button to dismiss the About CERDisp dialog box (see Example LXEConnect Notice image above) on the
Thor VM1 desktop by clicking the OK button in the LXEConnect window on the PC desktop. The dialog box
automatically times out and disappears after approximately 20 seconds.
7. The Thor VM1 can now be configured from the LXEConnect window. Input from the PC’s mouse and keyboard are
recognized as if they were attached to the Thor VM1.
8. When the remote session is completed, terminate the LXEConnect program by selecting File > Exit or clicking on the X
in the upper right hand corner to close the application, then disconnect the ActiveSync cable.
4-7