Honeywell THOR VM1, Справочное руководство, Страница: 207 / 324

Registry
Start > Settings > Control Panel > Registry
Choose options for managing the registry and rebooting the Thor VM1.
Tab Contents
Load User Defaults
When clicked, a standard load file dialog is opened, to allow the user to pick a Registry
Save (.RSG) file. The applet then copies the specified User registry file to the Active
registry. The user is asked to verify a reboot, and then the applet does a warmboot to
activate the new registry.
Save User Defaults
When clicked, a standard Save File dialog is opened, to allow the user to name the
Registry Save (.RSG) file. The applet then copies the Active registry to the specified
User registry file and reboots the device.
Load Factory Defaults
The applet copies the Factory Default registry from the OS to the Active registry (by
deleting the current registry). The user is asked to verify a reboot, and then the applet
performs a restart to activate the factory default registry. If a user password has been
set, the applet warns the user that the password will be erased, and asks them to enter
it before the reboot is allowed.
Warmboot
When clicked, the OS performs a registry save (Active registry saved to Flash registry
hive), and then a warmboot. The contents of RAM are preserved. CAB files already
loaded into RAM remain loaded.
Restart
When clicked, the OS performs a registry save, and then a restart. OS and CAB files
are reloaded.
3-145