Honeywell THOR VM1 Скачать руководство пользователя страница 196

Страница: 196 / 324

Misc

Options on this tab configure device specific options. Note that options not available on the Thor VM1 are dimmed or grayed
out.

CapsLock

By default, CapsLock is disabled after a warmboot. To enable CapsLock after a warmboot, check this checkbox.

Touch Screen Disable

By default, the Thor VM1 touchscreen is enabled. To disable the touchscreen after a warmboot, check this checkbox.

Note:

If the touch screen is disabled on a Thor VM1 with the 12-key keypad, you must use a USB mouse or

keyboard attached to the Thor VM1 to access this tab to re-enable the touch screen.

Enable Keypad Backlight

The keypad backlight default setting is to follow the display backlight setting until it is changed by the user.

Uncheck the checkbox to disable the keypad backlight.

Enable Auto-On

When Auto-On is enabled, the Thor VM1 boots when external power is applied.

When Auto-On is disabled:

if the ignition input signal is connected, when ignition changes from Inactive to Active the Thor VM1 boots.

if the ignition input is not connected, the Thor VM1 only boots when the power button is pressed.

The default is disabled.

3-134

Содержание THOR VM1





































































































































































































































































































































Результаты поиска

Содержание THOR VM1

Отзывы:

Honeywell THOR VM1, Справочное руководство, Страница: 196 / 324

Результаты поиска

Содержание THOR VM1

Отзывы: