Honeywell THOR VM1 Скачать руководство пользователя страница 195 | Manualshive

Страница: 195 / 324

Honeywell THOR VM1 Скачать руководство пользователя страница 195

Communication

Options on this tab configure communication options for the Thor VM1.

Enable TCP/IP Version 6

By default, IPv6 is disabled on the Thor VM1. Check this checkbox to enable IPv6.

Allow Remote Desktop Autologon

By default, Remote Desktop Autologon is disabled. Check this checkbox to enable Remote Desktop Autologon.

Note:

The .RDP file must be saved in the \System folder. When prompted, use the Save As button to save

the .RDP file is the \System directory. If the .RDP file is saved in the default root folder location, the
.RDP file will not persist across a warmboot.

Autolaunch TimeSync

By default, TimeSync does not automatically run on the Thor VM1. To enable TimeSync to run automatically on the Thor VM1,
check this checkbox.

Synchronize with a Local Time Server

By default, GrabTime synchronizes via an Internet connection. To synchronize with a local time server:

1. Use ActiveSync to copy GrabTime.ini from the

My Device > Windows

folder on the mobile device to the host PC.

2. Edit the copy of GrabTime.ini on the host PC. Add the local time server’s domain name to the beginning of the list of

servers. You can optionally delete the remainder of the list.

3. Copy the modified GrabTime.ini file to the

My Device > System

folder on the mobile device.

The System/GrabTime.ini file takes precedence over the Windows/GrabTime.ini file. System/Grabtime.ini also persists after a
coldboot; Windows/Grabtime.ini does not persist.

3-133

«
...
193
194
195
196
197
...
»

Содержание THOR VM1





































































































































































































































































































































Отзывы:

Нет отзывов