Honeywell THOR VM1 Скачать руководство пользователя страница 125 | Manualshive

Страница: 125 / 324

Honeywell THOR VM1 Скачать руководство пользователя страница 125

Options

Option

Function

Report when connection
lost

This option is Enabled (checked) by default.

There may be an audio or visual signal when a connection between a paired, active device is
lost.

A visual signal may be a dialog box placed on the display notifying the user the connection
between one (or all) of the paired Bluetooth devices has stopped. Tap the ok button to remove
the dialog box from the screen.

Report when reconnected

This option is Disabled (unchecked) by default.

There may be an audio or visual signal when a connection between a paired, active device is
made.

A visual signal may be a dialog box placed on the display notifying the user the connection
between one (or all) of the paired Bluetooth devices has resumed. Tap the ok button to remove
the dialog box from the screen.

Report failure to reconnect

This option is Enabled (checked) by default.

The default time delay is 30 minutes. This value cannot be changed by the user.

There may be an audio or visual signal when a connection between a paired, active device fails
to re-connect. A visual signal may be a dialog box placed on the display notifying the user the
connection between one (or all) of the previously paired Bluetooth devices has failed.

Tap the X button or ok button to close the dialog box.

Possible reasons for failure to reconnect: Timeout expired without reconnecting; attempted to
pair with a device that is currently paired with another device; attempted to pair with a known
device that moved out of range or was turned off; attempted to pair with a known device but the
reason why reconnect failed is unknown.

Clear Pairing Table on Boot

This option is Disabled (unchecked) by default.

When enabled (checked), all previous paired information is deleted upon any reboot sequence
and no devices are reconnected.

When enabled (checked) "Auto Reconnect on Boot" is automatically disabled (dimmed).

Auto Reconnect on Boot

This option is Enabled (checked) by default. All previously paired devices are reconnected
upon any reboot sequence.

When disabled (unchecked), no devices are reconnected upon any reboot sequence.

3-63

«
...
123
124
125
126
127
...
»

Содержание THOR VM1





































































































































































































































































































































Отзывы:

Нет отзывов