manualshive.com logo in svg

Honeywell Thor CV41, Руководство пользователя, Страница: 9 / 118

Поделиться
Скачать
Honeywell Thor CV41 Скачать руководство пользователя страница 9

CHAPTER

1

CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide

1

CUSTOMER SUPPORT

Product Service and Repair

Honeywell International Inc. provides service for all of its products through service cen-
ters throughout the world. To obtain warranty or non-warranty service, please visit 

www.honeywellaidc.com/locations

 to find contact information for your region’s service 

center. Be sure to obtain a Return Material Authorization number (RMA #). You should 
do this prior to returning the product.

Technical Assistance

If you need assistance installing or troubleshooting your device, please contact us by 
using one of the methods below:

Knowledge Base: 

www.hsmknowledgebase.com

Our Knowledge Base provides thousands of immediate solutions. If the Knowledge Base 
cannot help, our Technical Support Portal (see below) provides an easy way to report 
your problem or ask your question.

Technical Support Portal: 

www.hsmsupportportal.com

The Technical Support Portal not only allows you to report your problem, but it also pro-
vides immediate solutions to your technical issues by searching our Knowledge Base. 
With the Portal, you can submit and track your questions online and send and receive 
attachments.

Telephone: 

www.honeywellaidc.com/locations

For our latest contact information, please check our website at the link above.

Limited Warranty

Honeywell International Inc. (“HII”) warrants its products to be free from defects in 
materials and workmanship and to conform to HII’s published specifications applicable 
to the products purchased at the time of shipment. This warranty does not cover any HII 
product which is (i) improperly installed or used; (ii) damaged by accident or negli-
gence, including failure to follow the proper maintenance, service, and cleaning sched-

Содержание Thor CV41























































































































Отзывы:

Нет отзывов