manualshive.com logo in svg

Honeywell Thor CV41, Руководство пользователя, Страница: 84 / 118

Поделиться
Скачать
Honeywell Thor CV41 Скачать руководство пользователя страница 84

76

CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide

Find Your Operating System Version

Use the following procedure to find the OS version of your computer.

•

Tap 

Start

 > 

Control Panel 

> 

About

. The OS version is displayed in the 

Versions

 tab as 

the Intermec Content version.

View WWAN Settings

Use the following procedure to view your current WWAN settings.

•

Tap 

Start 

> 

All Programs

 > 

OneClick Internet 

> 

Settings

 and click the 

Info

 tab.

Reset the Computer

If the computer is not responding or an application locks up, you may need to reset the 
computer. The computer uses the configuration currently saved in flash memory during 
the boot process. There are two ways to reset the computer:

•

Restart or shut down the computer

•

Disconnect the UPS battery

Restart or Shut Down the Computer

If an application is not responding, you can try to restart or shut down the computer.

1. Tap 

Start

 > 

Shutdown

.

2. Select 

Shut down

 or 

Restart

 and tap 

OK

.

Disconnect the UPS Battery

Disconnect the UPS battery when the computer completely stops responding or when 
you are shipping the computer to another location. Because disconnecting may result 
in data loss, use this method only if all other recovery methods have failed.

1. Remove the CV41 from the smart dock. For help, see 

Remove the CV41 from the 

Smart Dock

.

2. Using a Phillips head screwdriver, remove the two screws that secure the SIM card 

access panel.

Содержание Thor CV41























































































































Отзывы:

Нет отзывов