Honeywell Thor CV41 Скачать руководство пользователя страница 67

Страница: 67 / 118

CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide

Activate UMTS Communications

You use a SIM card to activate UMTS communications on your computer. You can pur-
chase the SIM card from your network provider.

1. Remove the computer from the smart dock.

2. Press the

Power

button. The computer turns off.

3. Using a small Phillips screwdriver, remove the two screws that secure the SIM card

access panel.

4. Insert the SIM card into the SIM card slot.

5. Reattach the SIM card access panel and screw to a torque value of 4-5 in/lbs.

6. Reattach the computer to the smart dock.

7. Connect an external WWAN antenna. For more information, see

Connect an External

Antenna

8. Press the

Power

button. The computer turns on.

9. Tap

Start

All Programs

OneClick Internet

. The Oneclick

Internet application opens and tries to detect the carrier of the SIM you just inserted.

10. If the carrier is not detected, tap

Settings

and select the

Firmware

tab.

11. Select your carrier and tap

Change

Connected to WWAN.

Connection failure.

OneClick Internet Status Buttons and Icons (Continued)

Icons

Description

SIM card

Содержание Thor CV41























































































































Результаты поиска

Содержание Thor CV41

Отзывы:

Honeywell Thor CV41, Руководство пользователя, Страница: 67 / 118

Результаты поиска

Содержание Thor CV41

Отзывы: