manualshive.com logo in svg

Honeywell Thor CV41, Руководство пользователя, Страница: 23 / 118

Поделиться
Скачать
Honeywell Thor CV41 Скачать руководство пользователя страница 23

CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide

15

3. Tap 

OK

 when you are finished to save your changes.

About the Backup Battery

The computer has a permanent lithium-ion battery installed to maintain the time, date, 
and CMOS setup information for a minimum of 90 days. The lithium-ion battery is not 
user-replaceable and should last five years before it needs a replacement.

The backup battery must only be changed by authorized service personnel. For more 
information, contact your Honeywell service representative.

Insert an SD Card

You can use an SD card to increase file storage and install software. The computer sup-
ports SD cards up to 32 GB.

1. Remove the computer from the smart dock.

2. Press the 

Power

 button. The computer turns off.

3. Using a small Phillips screwdriver, remove the two screws that secure the SD card 

access panel.

4. Insert the SD card into the SD card slot.

5. Reattach the SD card access panel and screw to a torque value of

4-5 in/lbs.

6. Reattach the CV41 to the smart dock.

7. Press the 

Power

 button to turn on the computer.

SD card

Содержание Thor CV41























































































































Отзывы:

Нет отзывов