Honeywell Thor CV41 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 118

Honeywell Thor CV41 Скачать руководство пользователя страница 15

CV41 Vehicle Mount Computer (Windows Embedded Standard) User Guide

7

About the Power Supply Options

To operate the computer, you must provide power to the computer through the DC
power cable that is provided or through one of the following power supply options:

•

External 6-96 DC/DC Power Converter (requires

)

•

External AC/DC Power Supply (requires

Enhanced Dock for Off-Vehicle Use

The AC/DC power supply must be connected to a 120 V, 60 Hz supply in North America,
or to a 230 V, 50 Hz power supply outside of North America (appropriate AC cable not
included). Make sure that the external AC power is properly grounded and provides a
maximum of 15 A of overcurrent protection (10 A for 230 V circuits). For more informa-
tion on installing any of these power supply options, see the

CV41 Vehicle Mounting Kit

Reference Guide

.

Note:

In North America, the AC power supply is intended for use with a UL Listed ITE power
supply with an output rating of 12 to 48 VDC, minimum 15 W. Outside of North America,
the power supply is intended for use with an IEC certified ITE power supply with an output
rating of 12 to 48 VDC, minimum 15 W.

Contact your Honeywell representative to order one of the power supply options listed.
For installation instructions, see the

CV41 Vehicle Mounting Kit Reference Guide

.

About the Smart Dock

The smart dock is secured to a forklift using a RAM mounting kit and provides condi-
tioned power to the computer. The computer can then be connected or removed from
the smart dock at any time. With this unique system, you can easily move the computer
from one vehicle equipped with the smart dock to another. The smart dock includes:

•

a USB port.

•

two COM ports.

•

a CANBUS/audio port.

•

strain relief cable mounts.

To connect any accessory such as a tethered scanner, an audio headset, or a USB flash
drive, you need to purchase the correct accessory cables. For more information, contact
your Honeywell representative.

Caution: Be sure to use the proper dock for the application. See

for information.

Caution: Make sure the smart dock is powered off before you connect any

cables to it.

«
...
13
14
15
16
17
...
»

Содержание Thor CV41























































































































Отзывы:

Нет отзывов