manualshive.com logo in svg

Honeywell TELEPHONE ACCESS MODULE W8735D, Руководство пользователя, Страница: 6 / 36

Поделиться
Скачать
Honeywell TELEPHONE ACCESS MODULE W8735D Скачать руководство пользователя страница 6

6

69-2028—01

OPERATING YOUR TELEPHONE 

ACCESS MODULE

During the installation of your Telephone Access 

Module (TAM), the installer connected the unit to an 

available telephone jack in your home and configured 

the number of rings needed before the TAM answers 

a call.

A quick reference card (form 69-

2011) is included with the TAM. 

Use this wallet card to help you 

with the menu items, alerts, and 

zone names.

The TAM is equipped with an emergency telephone 

line disconnect feature activated when another 

receiver in the premises is picked up while the TAM is 

connected. 

To test the disconnect feature:

While connected on a call to the TAM, flick the 

receiver hook a few times in order for the TAM to 

hang up and for you to receive a dial tone.

Calling Your Telephone Access Module

Carefully review the Main menu (see Fig. 4 on 
page 11) before operating your TAM.

IMPORTANT:

The TAM is designed to provide remote tele-

phone access to your thermostat settings and 

information. To access this information or make 

changes, you must connect with the TAM from 

an outside line. If you want to access the TAM 

from within the home, you need to use a second 

phone line or call from a cellular telephone.

IMPORTANT:

When interfacing with the W8735D make sure to 

always press firmly and fully on the telephone 

key. Fast or light key presses can result in 

missed inputs.

IMPORTANT:

When dialing into the W8735D from a cellular 

telephone, make sure the reception is good. 

Faulty reception can result in missed key pad 

entries and eventual time-outs and hang ups.

The TAM can share the line with your telephone 

answering machine or voice mail.

80

90

70

60

90

80

70

60

Содержание TELEPHONE ACCESS MODULE W8735D





































Отзывы:

Нет отзывов