29
69-2028—01
Humidity (Indoor) High Limit Setting
The Humidity High Limit setting is used to activate an
alert when the indoor humidity is higher than the
value you set. The setting range is 5 to 95 percent in
5% increments. The factory default setting is 70%.
If the indoor humidity is higher than your high limit
setting and your dial-out alert is active, the TAM dials
out.
NOTE: In order for this feature to be enabled,
TH9421C1004 thermostats must be used.
CAUTION
Property Loss Hazard.
Prepare to act promptly; time may be
critical.
Do not assume your designate received and
acted on the active alert.
CAUTION
Property Loss Hazard.
Do not rely only on the Telephone Access
Module to identify potential problems in
your home (like detecting high humidity).
Have someone periodically check your home
while you are away.
If your humidity high limit setting is set to the factory
setting, you hear “The high limit setting is 70 percent.”
If your humidity high limit setting is correct and the
value you want, press the * key to return to the Main
menu.
NOTE: The Humidity High limit setting must be
greater than the Low limit setting.
CHANGING THE HUMIDITY HIGH LIMIT SETTING
1.
You hear “
To change the humidity high limit set-
ting, press 6
.”
2.
Press 6.
• You hear “
Enter the high limit setting followed
by the # key
.”
3.
Enter a high limit setting from 5 to 95% in 5%
increments and press the # key.
• You hear “
Your high limit setting is (your high
limit setting) percent
.”
4.
If this is the high limit setting you want pro-
grammed, press the * key to return to the Main
menu.
If the humidity high limit setting is not entered
correctly, you hear “
Invalid setting
.” Follow the
instructions above to enter a new humidity high limit.