28
69-2028—01
Humidity (Indoor) Low Limit Setting
The Humidity Low Limit setting is used to activate an
alert when the indoor humidity is lower than the value
you set. The setting range is 5 to 95 percent in 5%
increments. The factory default setting is 25%.
If the indoor humidity is lower than your low limit
setting and your dial-out alert is active, the TAM dials
out.
NOTE: In order for this feature to be enabled,
TH9421C1004 thermostats must be used.
CAUTION
Property Loss Hazard.
Do not assume your designate received
and acted on the active alert.
Prepare to act promptly; time may be critical.
CAUTION
Property Loss Hazard.
Do not rely only on the Telephone Access
Module to identify potential problems in
your home (like detecting low humidity
that can damage woodwork).
Have someone periodically check your home
while you are away.
If your Low Limit setting is set to the factory setting,
you hear “
The low limit setting is 25 percent
.”
If your humidity low limit setting is correct, and the
value you want, press the * key to return to the Main
menu.
CHANGING THE HUMIDITY LOW LIMIT SETTING
1.
You hear “
To change the humidity low limit set-
ting, press 5
.”
2.
Press 5.
• You hear “
Enter the low limit setting followed
by the # key
.”
3.
Enter a low limit setting from 5 to 95% in 5%
increments and press the # key.
• You hear “
Your low limit setting is (your low
limit setting) percent
.”
4.
If this is the low limit setting you want pro-
grammed, press the * key to return to the Main
menu.
If the humidity low limit setting is not entered correctly,
you hear “
Invalid setting
.” Follow the instructions
above to enter a new humidity low limit.