Honeywell TC500A Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 79

Honeywell TC500A Скачать руководство пользователя страница 9

CHAPTER

1

31-00400M-01 | Rev10-20

9

Introduction

About TC500A Thermostat

The TC500A Thermostat is an advanced, configurable, connected device for

commercial buildings. It controls and monitors RTU, AHU, Heat Pump equipment,

and their configurations. This device communicates over Wi-Fi, Bluetooth, BACnet IP

over Wi-Fi, BACnet RS485, Sylk to easily integrates with the building automation

system.
The built-in intelligent control algorithms of the device help to achieve the perfect

balance between Energy Efficiency and Comfort. The device is packaged with

numerous presets suitable for most commercial building requirements that enable

the easy and quick initial setup.
The firmware of the device can be upgraded via Wi-Fi network. The device has four

universal terminals and a pair of Sylk terminals to connect with sensors or other

accessories. It also has a built-in temperature sensor, humidity sensor, and proximity

sensor.

Features

• The device can be easily commissioned through the TC500A Connect Mobile

application.

• Easily customizable and intuitive UI.
• Supports BACnet system schedule and holiday configuration.
• Multiple, configurable, levels of user privilege access for features such as

Reminders, Occupancy set points, Date/Time, Schedules, Calendars of special

events, remote and local Manual Override, remote and local Occupancy Override,

Choice of language and units, and so on.

• Multiple, configurable, screen lockouts to prevent unauthorized settings changes.
• High level control algorithms such as Auto Changeover, Adaptive Intelligent

Recovery, Pre-occupancy Purge, Power up disable time, Freeze protection, and

Demand limit controls are supported.

• Settings to switch Fahrenheit to Celsius and vice-versa.
• Auto display sleep to save energy when there is no user action for configured time

out.

«
...
7
8
9
10
11
...
»

Содержание TC500A
















































































Отзывы:

Нет отзывов