Honeywell TB8220U1003 - Touchscreen Thermostat, 2h Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 32

Honeywell TB8220U1003 - Touchscreen Thermostat, 2h Скачать руководство пользователя страница 3

3

62-3071—2

FEATURES

• Large, Clear Display with Backlighting—current temperature, set temperature and

time are easy-to-read and all are displayed on the main screen.

• Menu Driven Programming—Provides guidance through the scheduling process,

showing only necessary information and choices on each screen.

• Ability to Select Multiple Days—allows easy customizing for unique schedules.
• Real-Time Clock—keeps time during power failure; automatically updates for

daylight savings.

• Armchair Programming—can remove thermostat from wall to set the schedule.
• Precise Temperature Control (±1°F)—reliable, consistent comfort.
• Multiple OVERRIDE options—can modify schedule indefinitely or for a specific

period of time.

• Programmable Fan—increases indoor air quality when combined with air

cleaning equipment.

• Outdoor Temperature Indication—displays current outdoor temperature to help

plan outdoor activities.

NOTE: The main screen can differ slightly, depending on the heating, ventilation and air

conditioning (HVAC) system and the thermostat settings for the system type.

«
1
2
3
4
5
...
»

Содержание TB8220U1003 - Touchscreen Thermostat, 2h

































Отзывы:

Нет отзывов