background image

PRODUCT DATA

® U.S. Registered Trademark
© 2004 Honeywell International Inc.
 All Rights Reserved 

63-2617

T7771A

 Remote Temperature Sensor

GENERAL

The T7771A Remote Temperature Sensors are direct wired 

wall modules for use with the Honeywell T7350 Commercial 

Programmable Thermostat. The T7771A has a space 

temperature sensor, LED pushbutton setpoint adjustment, and 

override with LED.

FEATURES

• Pushbutton setpoint adjustment with LED indicators.
• Occupied/unoccupied override (bypass) with LED.
• L

ON

W

ORKS

® bus jack.

• Operating range 45 to 99°F (7 to 37°C).

IMPORTANT

• The T7771 compatibility with the T7350 only applies 

to T7350 models with date code 0423 or later.

• To ensure the purchase of a compatible T7350, order 

either:

— Y7355B1002 (consisting of: T7350B Thermostat, 

T7771A and C7041B Sensors).

— Y7355D1008 (consisting of: T7350D Thermostat, 

T7771A, C7041B Sensors).

SPECIFICATIONS

Construction: 

Two-piece construction, cover and internally 

wired subbase. Field wiring 14 to 22 AWG (2.0 to 0.34 

sq. mm) connects to a terminal block in the subbase. Wall 

module is activated by plugging into prewired subbase.

Mounting Options:

The T7771 can be mounted on a standard two by four inch 

junction box or on a 60 mm diameter junction box.

Dimensions (H/W/D):

5-1/16 x 3-1/8 x 1 in. (128 x 80 x 25 mm).

Setpoint Adjustment:

The setpoint offset allows for ±3°F from the programmed 

T7350 setpoint.

Environmental Ratings:

Operating Temperature: 45° to 99°F (7° to 37°C).

Shipping Temperature: -40° to 150°F (-40° to 65°C).

Relative Humidity: 

5% to 95% noncondensing.

Temperature Sensor Operating Range:

45 to 99°F (10 to 37°C).

Temperature Sensor Accuracy

T7771A 20K Ohm Nonlinearized Sensor:

All T7771 models are furnished with a 20K Ohm nonlinear 

NTC temperature sensor that follows a specific 

temperature-resistance curve. See Fig. 1.

Sensor accuracy at 77°F is ±0.36°F (±0.2°C)

See form 63-7074 for detailed nominal temperature resistance 

output in table form.

NOTE: In addition, a jumper allows for 10K Ohm output to 

accommodate using multiple sensors for temperature 

averaging applications with the T7350 Commercial 

Thermostat. See the Wiring section for details.

Содержание T7771A

Страница 1: ...4 to 22 AWG 2 0 to 0 34 sq mm connects to a terminal block in the subbase Wall module is activated by plugging into prewired subbase Mounting Options The T7771 can be mounted on a standard two by four inch junction box or on a 60 mm diameter junction box Dimensions H W D 5 1 16 x 3 1 8 x 1 in 128 x 80 x 25 mm Setpoint Adjustment The setpoint offset allows for 3 F from the programmed T7350 setpoint...

Страница 2: ...button is pushed the T7350 setting changes to Temporary Occupied If pressed again the T7350 setting changes back to Occupied The override button has no effect when the T7350 programmed setting is already Occupied BEFORE INSTALLATION Cover Disassembly One locking mechanism is used on the wall module cover After installation to disassemble the cover and the subbase see Fig 2 Fig 2 Cover disassembly ...

Страница 3: ... blocks are designed to accept no more than one 14 AWG 2 5 sq mm conductor Connect multiple wires that are 14 AWG 2 5 sq mm with a wire nut Include a pigtail with this wire group and attach the pigtail to the individual terminal block Wire the terminal blocks as follows 1 For single wires strip 3 16 in 5 mm for multiple wires going into one terminal strip 1 2 in 13 mm insulation from the conductor...

Страница 4: ...th two sensors Fig 8 Temperature averaging with four sensors Fig 9 Attaching two wires at wall module terminals When all wiring is complete attach the cover of the T7771A Wall Module by reversing step 2 of Fig 2 1 2 3 4 5 6 7 8 9 SENSOR GND E BUS E BUS M22175 BYPASS STATUS SETPT 10K OHM OUTPUT J2 20K OHM OUTPUT J2 M22280 T4 T3 T7350 SUBBASE T7770A3002 T4 T3 T7771A J2 T4 T3 10K OHM OUTPUT J2 1 1 AP...

Отзывы: