Honeywell Sucre Box, Быстрое руководство по установке

Страница: 16 / 196

16
Installing other peripherals
For each device being registered
you have the upper message “New Device incoming…” and you will
hear the beeps from the badge reader.
Finalizing the installation
Once all peripherals are registered , finish the installation by clicking on the “Finish” button.
The finalization may take several minutes.
Le Sucre pre-configured parameters
- Peripheral parameter :
- DO8M, SHK8M detectors are :

Delayed

In partial partition (working in total and partial mode)
- IRPI8M, IR8M, CAMIR-F1, DT8M, DTPI8M, FG8M detectors are :

Delayed

In total partition (working only in total mode)
- All Life safety detectors (CO8M, DFS8M) are:

Immediate

In 24/24 partition
- DET8M detector is:

Immediate

In 24/24 partition
- CAMIR-F1 parameters:

Pictures per set: 5

Time between pictures: 300 ms
- Entry/Exit delays:
o
Total partition

Entry delay: 30 s

Exit delay: 30s
o
Partial partition

Entry delay: 30s

Exit delay: 30s
- Tag reader siren parameters:

Intrusion alarm duration: 180s
- Smoke alarm duration: 300s

Entry and exit beeps:

Beeps only present for total arm, silent for partial arm