Honeywell STT850 Series, Руководство пользователя

Страница: 35 / 118

Revision 4.0
STT850 Series HART/DE Option User’s Manual
Page 25

Parameter Set 2 permits entering/editing the values for the LRL, URL, LRV, URV, PV
Units, Damping, SV Units, Line Filter frequency, Sensor Type, and the output
characterization selection.

Parameter Set 3 is oriented primarily to the Honeywell SmartLine Temperature Transmitter
models for monitoring purposes.
4.4.3 Save to a File
Saving to a file in offline mode will let you add an edited configuration to a working file. Alternately,
if you decide not to save an edited configuration to the current file, you can select a new location and
file name for it. The default location and folder for saving configurations are
SD Card and CFG
MCT . The default name of a new configuration is New1 , which you can change for your needs.
4.4.4 Downloading in DE Offline Mode
Downloading a file to a Transmitter from the Toolkit requires a communicating connection between
the two units. Serial communication is established when you select
DOWNLOAD to Device from
the Toolkit Select Device menu. When the download completes, confirmation will be required to
affirm that the configuration for the Transmitter is to be saved.
4.4.5 DE Offline Parameterization
A table in Section 6, “Offline Configuration,” of the
MC Toolkit User Manual, 34-ST-25-80 contains
a list of the basic STT850 SmartLine Temperature Transmitter parameters for DE operation.