17”
11”
Fold
Fold
Fold
Fold
EN | 4
Model: ST124A216110
PROBLEM
Light will not come on.
A. Light not plugged into outlet.
B. Outlet not powered.
C. Bulb(s) not lighting
D. Remote control not working
A. Plug power cord into outlet.
B. Check to make sure breaker is on
and test outlet with another
working electrical device to make
sure it is receiving power.
NOTE:
Unplug power cord first.
C1. Check to see if screw cap is tight.
If loose, hand tighten.
C2. If screw cap is tight: Unscrew cap,
remove bulb and re-insert bulb.
Hand tighten. If bulb is still not
lighting, contact customer service.
D1. Replace the remote control battery.
D2. Contact customer service.
POSSIBLE CAUSE
SOLUTION
TROUBLE SHOOTING
International Development Company
899 Henrietta Creek Rd.
Roanoke, TX 76262 USA
Toll-free: 1-877-723-0723
Made in China
© 2019 IDC, all rights reserved.
The Honeywell Trademark is used under license
from Honeywell International Inc.
Honeywell International Inc. makes no
representations or warranties with respect
to this product. This product is manufactured for
International Development Company.
FCC WARNING:
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user authority to operate the equipment.
**********************************************************************************************
NOTES:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT SAFETY INSTRUCTIONS
Note:
This portable luminaire has a polarized plug (one blade is wider than the other) as a feature to
reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with
an extension cord unless plug can be fully inserted. Do not alter the plug.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Use and Care Guide
Read and Save this Instructions Before Use
EN
LED Color Changing String Lights Set
with Remote Control
