Honeywell SS431P Скачать руководство пользователя страница 1

Installation Instructions for the

ISSUE 1

SS431P Hall Effect Sensor

PK 80076

HONEYWELL

 Sensing and Control

WARNING

PERSONAL INJURY

• 

DO NOT USE these products as safety or
emergency stop devices, or in any other
application where failure of the product could
result in personal injury.

Failure to comply with these instructions could
result in death or serious injury.

SOLDERING/ASSEMBLY

Leads must be adequately supported during any

forming/ shearing operation to ensure that the leads
are not stressed inside the plastic case. Recom-
mended PC board wave soldering temperature is
250 to 260

o

C (482 to 500

o

F) for 3 seconds

maximum.

ABSOLUTE MAXIMUM RATINGS*

Supply voltage

-1 to +30 VDC

Voltage externally
applied to output

+30 VDC max. (OFF only)
-0.5 VDC min. (OFF or ON)

Output ON current

50 mA max.

Storage Temperature

-65 to +160

°

C (-85 to +320

°

F)

Magnetic flux

No limit. Circuit cannot be
damaged by magnetic
overdrive.

*Absolute maximum ratings are the extreme limits that
the device will withstand without damage to the device.
However, the electrical and mechanical characteristics
are not guaranteed as the maximum limits (above
recommended operating conditions) are approached, nor
will the device necessarily operate at absolute maximum
ratings.

NOTICE

Interruption of power to a bipolar or latching

device may cause the output to change state when
power is restored. If a magnetic field of sufficient
strength is present, the sensor output will be in the
condition dictated by the magnetic field.

NOTE:  The SS431P is a 2-wire, current output

sensor.

OPERATING CHARACTERISTICS

Min.

25°C

Target

Max.

Remarks

Supply voltage

3.8

24

VDC

I

CC

 Operate

11

15

20

mA

I

CC

 Released

4

6

9

mA

I

CC

 Ratio (Op/Rel)

2.0

2.5

4.0

mA

Output switching time
    Rise, 10 to 90%
    Fall, 90 to 10%


30 

µ

s

30 

µ

s


V

CC

 = 12 V. R

L

 = 300 

,

C

L

 = 33 nF, C

S

 = 330 pF

Operating Temperature

-55 to +160

°

C (-67 to +320

°

F)

MAGNETIC SPECIFICATIONS

Temperature Range

-40°C

0°C

25°C

85°C

125°C

150°C

Max. Operate Gauss

70

65

60

60

65

70

Min. Release Gauss

-70

-65

-60

-60

-65

-70

Min. Differential Gauss

15

15

15

12

12

10

Содержание SS431P






Отзывы: