Honeywell SMX-AUS Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 44

Honeywell SMX-AUS Скачать руководство пользователя страница 7

User’s Guide SMX-AUS

NS-MN-0032 / 11.2020

7

1

About this Guide

This guide is for users trained to take care of operations and provide panel-related services.

1.1

Supplemental Documentation

The table below provides a list of documents for various users of SMX-AUS fire panels.

Document Name

Document Number

SMX-AUS Programming Guide

NS-MN-0031

SMX-AUS User’s Guide (This document)

NS-MN-0032

SMX-AUS Installation Guide

NS-MN-0030

SMX-AUS Operating Instructions

CN-MN-0234

SMX-AUS Fire Alarm Control Panel (FACP) Quick Start Guide A05-1062-000

1.2

Notice

The material and instructions covered in this guide have been carefully checked for accuracy and are presumed to be correct. The images in the document are for
reference purpose only and are subject to change. However, the manufacturer assumes no responsibility for inaccuracies and reserves the right to modify and revise
this document without notice.

The images in the document are for reference purpose only and are subject to change.

These instructions cover the programming and commissioning of the SMX-AUS Fire Alarm Control Panels (FACP). For any technical assistance email at
[email protected].

«
...
5
6
7
8
9
...
»

Содержание SMX-AUS













































Отзывы:

Нет отзывов