Page 28
STT700 Series HART/DE Option User’s Manual
Revision 1
In addition to file saving confirmation, DE offline file management provides access to three parameter
sets for review and editing:
Parameter Set 1
consists of the description of transmitter according to bus type, device type,
serial and model number, and the manufacturer.
Parameter Set 2
permits entering/editing the values for the LRL, URL, LRV, URV, PV
Units, Damping, SV Units, Line Filter frequency, Sensor Type, and the output characterization
selection.
Parameter Set 3
is oriented primarily to the Honeywell SmartLine Temperature Transmitter
models for monitoring purposes.
4.4.3 Save to a File
Saving to a file in offline mode will let you add an edited configuration to a working file. Alternately,
if you decide not to save an edited configuration to the current file, you can select a new location and
file name for it. The default location and folder for saving configurations is
SD Card
and
CFG MCT
.
The default name of a new configuration is
New1
, which you can change for your needs.
4.4.4 Downloading in DE Offline Mode
Downloading a file to a transmitter from the Toolkit requires a communicating connection between the
two units. Serial communication is established when you select
DOWNLOAD to Device
from the
Toolkit
Select Device
menu. When the download completes, confirmation will be required to affirm
that the configuration for the transmitter is to be saved.
4.4.5 DE Offline Parameterization
Section 5.7 “Offline Configuration,” of the
MC Toolkit User Manual, #34-ST-25-50 (MCT404),
contains a list of the basic STT700 SmartLine Temperature Transmitter parameters for DE offline
operation.
